Allen & Heath New Product

Here is something for you audio guys to see at the upcoming CX Summer Roadshow.  It is the Allen & Heath ME Personal Mixing System. This neat device is designed to work with iLive, GLD and other digital mixing systems. This unit puts the artist in control of thier own monitor mix, now more waggling fingers at the engineer. The musician has maximum control over the details of their personal mix. The ME-1 is easy to use, with straightforward controls.

•    Fully customisable
•    Intuitive operation
•    Compact, smart design
•    40 sources from GLD or iLive
•    Compatible with MADI, Dante or EtherSound*
•    Daisy chain or use standard PoE Ethernet hubs
•    16 assignable keys to suit application

*via ME-U hub

ME-1

ME-1

It features are:

16 assignable user keys

Backlit rubber keys make ME-1 controls perfectly visible in the dark. The 16 user keys can be assigned to a single source (mono or stereo) or to a Group, with all the convenience of pressing a single button no matter what you want to control – the vocalist mic, a stereo pair or the whole drumkit. Preset store/recall can be enabled or disabled per key to present only the control that is needed.

 

16 user presets

Levels, pan, mutes and key assignments can all be stored and recalled at the touch of a button.

Presets for different bands and application scenarios can be conveniently copied to USB key or the whole configuration saved. Ideal for archiving or quick transferring to other units.

Groups

Groups make it possible to mix up to 40 sources with only 16 keys. They also save a lot of buses at the main console: whereas other personal monitor systems rely on subgroups and pre-mixes sent from the console, ME-1 has the sophistication to  do it all on-board whilst remaining easy to use.

 

OLED screen

Provides a clear display of level and pan for the selected source, system setup and information

menus, and a highly responsive stereo signal meter. Can be dimmed for low-light operation.

Custom Naming

It helps to know which source you are tweaking! ME-1 can display custom names for all channels and groups. When coupled with an Allen & Heath GLD system using dSNAKE, the ME-1 does the work for you by picking up source names automatically from the stream.

One knob controls everything

A single, large rotary control beneath the display is used to access and navigate all of ME-1’s most commonly used functions and menus, including:

  • Input control of level & pan
  • Group control of master level
  • Level/pan for each member of the group
  • Control of master EQ and limiter
  • Global Trim (simultaneously adjusts all channel levels to prevent running the mix too hot)

Master level and key

Dedicated control and key to access the Master 3-band EQ and limiter settings.

Built-in ambient mic
With ME-1, musicians are not isolated from the rest of the stage. The ambient mic keeps them in touch with the stage sound and lets them hear the audience and communicate with each other without the need to pull out their ear pieces. The local mic level is independent of the master level control.
Solo and Mute keys

Individual sources, groups or masters can be muted. Use the Solo key to meter and listen to just their contribution to the mix.

 

Shifted functions
System setup, standby mode and preset store are protected from accidental operation by holding

Shift while pressing other keys. All input levels can be simultaneously trimmed by holding Shift while turning the rotary.

Headphones

Minijack and 1/4” headphone outputs with powerful, discrete amplifier design.

 

Mono Out

1/4” TRS balanced line out (mix only, no ambient mic).

 

Aux Input

Stereo input for local sources such as MP3 players or click tracks. Sensitivity is well

matched to portable consumer devices.
Link In / Out

Secure and reliable EtherCon connectors for daisy chaining or star topology using ME-U or

off-the-shelf Ethernet switches for any number of ME-1 mixers.
DC In

ME-1 can be powered via Cat5 using a PoE switch or the ME-U hub, or mains powered using the included power supply.

 

USB port

For firmware updates, archiving / transferring individual presets or the full configuration, or charging portable devices!
Free standing or surface mounted

Mount on top of a mic stand with the built-in 3/8” insert, or mount on the side of the stand with the supplied bracket

My info can be found HERE

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s